Polaris RZR Pro R/Turbo R 2" Forward Control Arms

Tired of the weak AF Front Factory Control Arms? Need to clear XL Tires too? Well we have you covered. With this Latest Update Gilleyfab Has Shaved a Whopping 11 lbs from our Previous Control Arm designs without Losing any Structural integrity.

All Made From Laser cut and CNC Bent 1/8th Inch Steel Plate with 7/8 Plate Shock To Lower Uni ball Support You cannot Go wrong. Fully Internally Braced, Fully Boxed and using Common Bearings This is sure to Keep You Racing for Years to come!

Arm Features

100% American Made in house.

Direct Bolt on Upgrade No Mods Required.

Only 6.8 Pounds Heavier than the Stock Arms, and a Ridiculous amount of added Strength.

With our Patent Pending Sealed Lower Cup Design You wont have to worry about Dirt and Debris Intrusion onto our Lower joints which Feature FK 7/8 PTFE Uni balls Rated at 65,200Lbs of Radial Load and 10,800 Lbs Of Axial Load Paired with our 300M Vacuum Funace Heat Treated Lower Pins (Rated at 170,000 Lbs of Tensile Strength) You can Absolutely Rely on These to get you Safely back From any Obstacle.

Full Billet Pivot Sleeves With Center Shoulder and Double the wall Thickness of Factory Pivots, These arms Accept all Aftermarket Bushing Types So if the Pivots wear out you can Purchase off the shelf Aftermarket Bushings.

Also We use FK-COM12T Shock Eye Bearings with 17-4 Stainless Spacers (All Parts are Readily available) Encased In 4130 Billet Cups and Spiro lock Snap Rings to Ensure Plenty of Bearing Support. These Offer Aftermarket off the Shelf Support and Peace of mind knowing these Parts are built for absolute torture!

With the 2" Of forward adjustment we made you can Clear up to a 39" tire at stock wheel offsets full lock to lock and Full compression. 

and for those of you running portals, These arms will absolutely take on the added loads with no issue!

Lightweight Upper arm Design Using .120 Wall DOM Tube Fully Tig welded and Gusseted these look awesome and offset the Lower Arm Weight by a few pounds and are Far Stronger than the Factory Upper Arms!

Offering Several Upper arm options with Ball Joints or Heim Joints (Will Require Camber Alignment)

Optional Sway Bar Tabs

Package includes

Full Set of Front Arms

Heavy Duty Oil impregnated Bushings

Greasable Pivot Sleeves

All Installation Hardware Necessary 

Gilleyfab Lifetime Warranty against Craftsmanship or Defects on Our Fabricated Parts If you break these we will Replace them!

 Gilleyfab Recommends a Full Alignment of the Front end after installation!