Starlink Standard, GEN 3 Roam Dish Case

Specifically designed for the new flat dish, non actuated, ROAM system.

(Flat dish with a kickstand underneath) 

Designed around the most trusted, durable name of Pelican Products USA, this case offers 360 degree foam protection for your dish and all components. Pre-wired, all weather ports means no more plugging and unplugging tangled cables and cords. Simply load your router/power unit and you are ready to hit the road. Each case also includes an extendable handle and wheels so moving your system is simple and comfortable. 

This case allows you to operate your Starlink system in 3 different configurations with most of them requiring little to no plugging and unplugging of cables or cords.

Option 1. The dish is stowed inside the case at a specific angle similar to  Starlinks suggested alignment angle. Connecting to the internet using this option is as easy as simply opening the lid and supplying power to the case. This keeps the system cool and is the fastest way to operate without making any connections other than an extension cord.  

Option 2. If you do not want to operate your system with the lid open, you simply remove the dish from the case and use the supplied 3’ cable to connect the dish while sitting on the top or next to your case. That’s right, each case comes with this short ethernet cable meaning you do not have to remove that long, tangled cord unless you want to operate the dish a distance from the case. This is the preferred method for operating your Starlink system using the Savage Case.

Option 3. It is possible to operate your entire system inside the case with the lid closed. You MUST BE EXTREMELY CAREFUL with what environment you are in when you use this method and for how long you use this method. Starlink recommends not to operate the system components in an environment above 122 degrees F for the router and 140 degrees F for the power unit. Operating the entire system inside the case is possible but you must be EXTREMELY aware of the heat being generated by the system.

We strongly recommend using a thermal sensor that is available in the dropdown menu at checkout. We have found great success using this device to accurately track thermal patterns inside the case. This will allow you to monitor the internal temperature and humidity of the case while it is operating. You set the parameters for when the sensor will notify you and once it reaches that temperature, you receive a text or email within seconds.

We DO NOT recommend operating your system while it is entirely enclosed in temperatures above 60 degrees F or for extended periods of time beyond 2 hours. The thermal testing we did showed minimal temperature increase for the first 2-3 hours. However, with the case closed, the heat generated from the dish is not able to escape and the temperature will just continue to build.

  

We always recommend using Option 2 to deploy your system. It is the safest and simplest method in any environment.   

Add-ons:

• A 12V DC CONVERSION KIT can be added to your case and allows you to power your system from a 12 Volt source. This conversion kit includes a hard mounted 300-watt pure sine wave inverter, external weatherproof port, as well as a few short wire options allowing you to connect to a cigarette port, alligator clip to a battery, or hard wire to a vehicles power system.
• Every case still includes the 110AC port even if you add the 12VDC kit. 

• ETHERNET PORTS: Starlinks router for this dish allows the user to add up to (2) hard wired ethernet connections to the system. You can add additional ethernet ports to your case allowing you to run those hard-wired connections externally through weatherproof ports on the rear of your case.