Starlink Standard Gen 3 Equipment Case with optional Inverter

Mounting the Starlink Standard Roam Dish (Starlink Gen 3) to a roof has become a popular option for many consumers.  But what about the rest of your Starlink Equipment?  This small, lightweight Pelican case was designed to keep your power supply and router easily accessible, clean and protected.  Both of these devices are securely strapped onto the interior mounting platform and those additional cords are designed to be strapped and stored out of sight. The user simply plugs an extension cord into the waterproof 110 AC Port, and Starlink Dish cord into the Ethernet Port to operate their system.  We also offer the option to add an Inverter that fastens to the bottom of this internal platform, and an additional Ethernet Port if you plan to connect directly to your router.

 

Additional case colors are an option, please reach out to us at sales@savageutv.com to inquire on options and lead time.

 

Optional Add On's:

• A 12V DC CONVERSION KIT can be added to your case and allows you to power your system from a 12 Volt source. This conversion kit includes a hard mounted 300-watt pure sine wave inverter, external weatherproof port, as well as a few short wire options allowing you to connect to a cigarette port, alligator clip to a battery, or hard wire to a vehicles power system.  (*every case stuill includes the 110AC Port even if your add the 12V DC kit)

 

• ETHERNET PORTS: Starlinks router for this dish allows the user to add up to 2 hard wired ethernet connections to the system. You can add an additional ethernet port to this case allowing you to run those hard-wired connections externally through weatherproof ports.

• THERMAL SENSOR: The Govee Wifi sensor will measure its surrounding environments temperature and humidity within about .5F and +3% RH. This allows you to monitor your Starlink Satellite System remotely via Wifi to ensure the router or inverter are not being operated outside of Starlinks recommended temperatures of 22F-122F. This will also let you know if excessive moisture levels are present inside your case. 

 

 

 

 

Fitment: Starlink Standard Roam Equipment (Gen 3).  Does not fit other versions.

Size: 15.41 x 13.08 x 6.16 in

Weight: 7.9#

 

 

Savage UTV is not endorsed by Starlink or Pelican products.  Starlink Dish and Equipment is not included in this purchase and must be purchased separately. Savage UTV is not responsible for the improper use of your Starlink system and we strongly encourage each user to follow Starlink recommendations to keep the equipment below 120 degrees F. If any user plans to use this case in high or low temperatures, we recommend a sensor to monitor the temperature.  Click here to view the link to the sensor we recommend and have tested.  We offer you the equipment to be able to effectively monitor your equipment, but the responsibility is on the user.